# Robo Warrior (U)

## Status

**Pass 0 skeleton.** The project builds and verifies byte-identical to the
original ROM, but no disassembly exists yet: `prg.s` is a single
`.incbin "prg.bin"` of the PRG image.

`make` assembles `header.s`, `prg.s`, links them with `ld65` and compares the
result against `rom.nes`:

```
Byte-identical ROM verified.
```

## ROM

| Property | Value |
|----------|-------|
| Format | iNES |
| Mapper | 2 |
| Board | UNROM |
| Mirroring | Vertical |
| Four-screen VRAM | no |
| Battery | no |
| PRG | 128 KB (8 x 16 KB), at file offset $0010 |
| CHR | none |
| Trainer | none |
| Footer | none |
| NMI vector | $CF75 |
| RESET vector | $C0D0 |
| IRQ vector | $FFF9 |
| ROM file | `Robo Warrior (U).nes` |
| SHA-256 | `463f9803e82ff60cf4d2a30b8cb59abdf96e13d463f4e36d34353c3befbde5bb` |

### Header notes

- none

## Open work

- **Pass 1** - run `nesdis.py` over `prg.bin` to produce the code/data
  split. The tracer reads the vectors from the last six bytes of the PRG
  image, so the split seeds correctly.
- **Pass 1** must emit the canonical audit comment
  `; CPU:$C123 PRG:0123  AD 21 03` at column 35 for every instruction.
- **Pass 2** - replace the address-derived `Label_XXXX` names and the raw
  `$XXXX` call operands.
- **Pass 3** - semantic zero-page aliases (applied only at the sites where
  their role is proven) and named data tables.
- **Promotion** to `NROM/<name>/` once Pass 3 is done, as `git mv`.

## Files

| File | Purpose |
|------|---------|
| `prg.s` | Pass 0 PRG include (replaced by the Pass 1 disassembly) |
| `header.s` | iNES header include |
| `prg.bin` | 131072 bytes (128 KB) PRG image |
| `rom.nes` | byte-identical copy of the original ROM |
| `linker.cfg` | HEADER / PRG memory areas |
| `symbols.inc` | NES hardware register names |
| `locals.inc` | zero-page aliases (empty at Pass 0) |
| `Makefile` | build and byte-identity check |