disasm/Wild Gunman (U)/OVERVIEW.md

Wild Gunman (U) — Game Flow from Power-On

This document describes the execution flow of the disassembled Wild Gunman (U) PRG bank (16 KB, mapped at CPU $C000–$FFFF), starting from power-on. It is based entirely on copilot/prg.s in the repository. The rebuild is verified byte-identical to the original prg.bin.

---

1. ROM and Memory Layout

Property	Value
Format	iNES
PRG	1 × 16 KB (mapped at CPU $C000–$FFFF)
CHR	1 × 8 KB
Mirroring	Horizontal
PRG bank start	CPU $C000
Source file	copilot/prg.s (~3,000 lines with headers)
Output	reconstructed_prg.bin (16,384 bytes)

Interrupt vectors (CPU $FFFA–$FFFF)

Vector	Address	Handler
NMI	$C086	NmiHandler
RESET	$C000	Reset
IRQ / BRK	$C000	Reuses Reset

---

2. Build Status

make in copilot/ assembles prg.s with ca65, links with ld65, and verifies against prg.bin.

Verification result: BYTE-IDENTICAL — reconstructed_prg.bin matches prg.bin exactly (all 16,384 bytes), and prg.bin matches the PRG bank of Wild Gunman (U) [!].nes.

---

3. Pass Status

Pass	Status	Description
Pass 1	Complete	Code/data split — entire PRG bank classified as traced code (~20%) or explicit .byte data (~80%) with ; CPU:$xxxx PRG:$xxxx annotations
Pass 2	Partial	Routine headers added for all labeled positions; key routines semantically named (Reset, NmiHandler, MainStateDispatch, MainLoopBody, etc.); zero-page aliases in locals.inc
Pass 3	Partial	Some data tables referenced by name in code; deeper table naming is future work

---

4. Reset — CPU $FFFC → $C000

Reset ($C000)

On power-on or reset:

1. CLD — clear decimal mode; SEI — disable maskable interrupts.
2. Wait for PPU warm-up vblank — poll $2002 bit 7 until clear (bpl loop at $C002–$C005).
3. STX $2000 / STX $2001 — disable PPU rendering and NMI with X=0.
4. DEX / TXS — initialize stack pointer to $FF.
5. LDX $05EC — read OAM base value; LDY #$06 / STY $01 — set up a 6-page counter.
6. Clear RAM — zero pages $0000–$05FF via indirect store loop (STA (Zp00),Y with page increment).
7. LDX #$5F / STX $05EC — set OAM base to $5F.
8. JSR ResetInitSub1 ($C20B) and JSR ResetInitSub2 ($C21B) — initialization subroutines.
9. Set scroll to 0 (STA $2005 twice with Y=0).
10. LDY #$01 / STY $30 — set GameMode = 1.
11. LDA #$0F / STA $4015 — enable all APU channels.
12. JSR $FFF7 — jump via vector to sound init at $F40F.
13. LDA #$90 / STA $2000 — set PPUCTRL = $90 (NMI enabled, $2000 base).
14. STA Zp08 ($08 = $90); LDA #$02 / STA Zp09 ($09 = $02).
15. Copy 12 bytes from $C844 to $05F0 (sprite/OAM data table).
16. Main loop (Label_C07C at $C07C): check NmiPhase ($20); if nonzero, jump to $C061; otherwise call MainLoopBody ($C573) and loop forever.

Key point: Like several other games in this repo, the main loop is essentially driven by NMI. The Reset code sets up hardware and enters a loop that waits for NMI phase changes.

---

5. NMI / Frame Heartbeat — NmiHandler ($C086)

The NMI fires once per frame:

1. Save registers (PHP / PHA / TXA / PHA / TYA / PHA).
2. Set OAMADDR to 0 (STA $2003), trigger OAM DMA (STA $4014 with value 2 → $0200–$02FF).
3. Check NmiFlag ($22) — if nonzero, skip to $C0A6 (restore registers, RTI).
4. Game logic — call NmiGameLogic3 ($C29F), NmiGameLogic1 ($C233), NmiGameLogic5 ($C3AC), NmiGameLogic2 ($C265).
5. LDY #$01 / STY NmiFlag and STY NmiPhase — set both flags to 1.
6. Restore registers (PLA / TAY / PLA / TAX / PLA / PLP / RTI).

---

6. Main State Dispatcher — MainStateDispatch ($C0B3)

Checks GameMode ($30):

• If nonzero: branch to $C130 (other game mode handler).
• If zero: check Ctrl1 ($16) bit 4 (AND #$10); if zero, go to $C10A.
• Otherwise, read OAMBase ($05FC) into Y; if nonzero, go to $C10F.
• Continue with startup sequence.

---

7. Key Subroutines

Label	Address	Description
Reset	$C000	Cold-start initialization and main loop entry
NmiHandler	$C086	Per-frame NMI: OAM DMA, game logic, register restore
MainStateDispatch	$C0B3	Game mode dispatch based on $30
ResetInitSub1	$C20B	Reset initialization subroutine
ResetInitSub2	$C21B	Reset initialization subroutine
NmiGameLogic1	$C233	NMI game logic (called from NMI)
NmiGameLogic2	$C265	NMI game logic (called from NMI)
NmiGameLogic3	$C29F	NMI game logic (called from NMI)
NmiGameLogic4	$C32B	NMI/gameplay logic
NmiGameLogic5	$C3AC	NMI/gameplay logic
MainLoopBody	$C573	Main loop body, called each frame
Sub_C5D1	$C5D1	Subroutine called from 5 call sites

---

8. Zero-Page Aliases (locals.inc)

Alias	Address	Role
GameMode	$30	Current game mode/state
NmiPhase	$20	NMI phase flag
NmiFlag	$22	NMI flag
Timer2F	$2F	Frame timer
Ctrl1	$16	Controller 1 state
Mode38	$38	Mode byte
Zp00	$00	Indirect pointer lo (RAM clear)
Zp01	$01	Indirect pointer hi (RAM clear)
Zp08	$08	PPUCTRL value ($90)
Zp09	$09	Value $02

Full list in copilot/locals.inc.

---

9. Build

cd "_wip/Wild Gunman (U)/copilot"
make        # → ca65 + ld65 + cmp reconstructed_prg.bin prg.bin → "BYTE-IDENTICAL"

---

10. Notes

• The PRG is approximately 20% code / 80% data. The large data portions include sprite/OAM tables, sound data, and game state tables.
• The NMI handler drives the per-frame game loop; the main loop (Reset at $C07C) spins waiting for NMI phase changes.
• GameMode ($30) selects between different game states/modes.
• The vectors at $FFF4 and $FFF7 are indirect jump targets to sound routines at $F372 and $F40F respectively.
• IRQ vector points to $C000 (Reset) and is effectively unused.

---

11. Next Steps

• Promotion — move to a top-level Wild Gunman (U)/ folder, add header.s / chr.s + full-ROM make target (as e.g. Burger Time (U)), then join the root OVERVIEW.md numbered inventory.
• Pass 2/3 continuation — semantically rename remaining Label_Cxxxx routines, name data tables (sprite data at $C844, sound tables in $E000–$FFFF range), and refine zero-page aliases.